currency_strenght_fast[1].
Download scriptThis script is designed as a specialized technical analysis tool for MetaTrader 4 that calculates "synthetic" price values based on the movement of multiple currency pairs simultaneously. Instead of looking at a single chart in isolation, it analyzes how specific currencies (EUR, USD, GBP, CHF, and JPY) are behaving relative to one another across various markets.
Core Functional Logic
1. Multi-Currency Correlation The primary logic of this tool is to break down the price of a currency pair into its fundamental components. For example, if you are looking at EURUSD, the script doesn't just look at that single chart. It calculates a value for "EUR" and a value for "USD" by aggregating data from several other pairs (like EURGBP, USDCHF, and USDJPY). By doing this, it attempts to create a more holistic view of the currency's strength or weakness by incorporating secondary market influences.
2. Dynamic Timeframe Adaptation The script is designed to be "context-aware." It automatically detects which timeframe you are currently viewing (ranging from 1 minute up to 1 month). Based on your selection, it adjusts its internal settings to ensure the moving averages used for the calculations remain consistent with the speed of the chart you are trading.
3. Calculation Methodology For each specific currency, the script performs a weighted calculation:
- It looks at the difference between two moving averages (a "fast" and a "slow" average).
- It applies specific multipliers (e.g., 10,000 for most pairs, 100 for JPY pairs) to normalize the data so that different currencies can be compared accurately on the same scale.
- It subtracts one currency's calculated value from the other to arrive at a "net" price.
4. Visual Output The script processes these complex calculations and outputs them into three visual components on a separate window:
- Base Value: A calculation of the average of the Open, High, Low, and Close prices derived from the multi-currency logic.
- Directional Histograms: The script then evaluates this base value to determine its polarity.
- If the resulting value is positive, it is displayed as a green histogram.
- If the value is negative, it is displayed as a red histogram.
- If the value is zero, no histogram is shown.
Summary for the User
Essentially, this tool acts as a "composite" indicator. It tries to filter out the "noise" of a single currency pair by looking at how the underlying currencies are performing across five different major markets simultaneously. It then simplifies all that complex data into a simple visual signal: a green histogram for upward momentum based on the combined strength of the currencies, and a red histogram for downward momentum.
//+------------------------------------------------------------------+
//| Complex_pairs.mq4 |
//| SemSemFX@rambler.ru |
//| http://onix-trade.net/forum/index.php?showtopic=107 |
//| http://forum.alpari-idc.ru/viewtopic.php?t=46916 |
//+------------------------------------------------------------------+
#property copyright "SemSemFX@rambler.ru"
#property link "http://onix-trade.net/forum/index.php?showtopic=107"
#property link "http://forum.alpari-idc.ru/viewtopic.php?t=46916"
//----
#property indicator_separate_window
#property indicator_buffers 3
#property indicator_color1 Black
#property indicator_color2 Green
#property indicator_color3 Red
//---- buffers
double ExtBuffer0[];
double ExtBuffer1[];
double ExtBuffer2[];
//---- parameters
// for monthly
int mn_per=50;
int mn_fast=1;
// for weekly
int w_per=50;
int w_fast=1;
// for daily
int d_per=50;
int d_fast=1;
// for H4
int h4_per=50;
int h4_fast=1;
// for H1
int h1_per=50;
int h1_fast=1;
// for M30
int m30_per=50;
int m30_fast=1;
// for M15
int m15_per=50;
int m15_fast=1;
// for M5
int m5_per=50;
int m5_fast=1;
// for M1
int m1_per=50;
int m1_fast=1;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int init()
{
//---- indicators
SetIndexStyle(0,DRAW_NONE);
SetIndexStyle(1,DRAW_HISTOGRAM);
SetIndexStyle(2,DRAW_HISTOGRAM);
IndicatorDigits(Digits+1);
SetIndexDrawBegin(0,34);
SetIndexDrawBegin(1,34);
SetIndexDrawBegin(2,34);
SetIndexBuffer(0,ExtBuffer0);
SetIndexBuffer(1,ExtBuffer1);
SetIndexBuffer(2,ExtBuffer2);
IndicatorShortName(Symbol() + "(" + Period() + "): ");
SetIndexLabel(0, Symbol());
SetIndexLabel(1,NULL);
SetIndexLabel(2,NULL);
//----
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator deinitialization function |
//+------------------------------------------------------------------+
int deinit()
{
//----
//----
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
int start()
{
int limit;
int counted_bars=IndicatorCounted();
double OPEN,HIGH,LOW,CLOSE;
//---- ïðîâåðêà íà âîçìîæíûå îøèáêè
if(counted_bars<0) return(-1);
//---- ïîñëåäíèé ïîñ÷èòàííûé áàð áóäåò ïåðåñ÷èòàí
if(counted_bars>0) counted_bars-=10;
//----
limit=Bars-counted_bars;
//---- îñíîâíîé öèêë
int Price=6;
int Mode=3;
int per1,per2;
double prev,current;
switch(Period())
{
case 1: per1=m1_per; per2=m1_fast; break;
case 5: per1=m5_per; per2=m5_fast; break;
case 15: per1=m15_per;per2=m15_fast; break;
case 30: per1=m30_per;per2=m30_fast; break;
case 60: per1=h1_per; per2=h1_fast; break;
case 240: per1=h4_per; per2=h4_fast; break;
case 1440: per1=d_per; per2=d_fast; break;
case 10080: per1=w_per; per2=w_fast; break;
case 43200: per1=mn_per; per2=mn_fast; break;
}
for(int i=0; i<limit; i++)
{
if (Symbol()=="EURUSD")
{
OPEN=EUR(Mode,PRICE_OPEN,i,per1,per2)-USD(Mode,PRICE_OPEN,i,per1,per2);
HIGH=EUR(Mode,PRICE_HIGH,i,per1,per2)-USD(Mode,PRICE_HIGH,i,per1,per2);
LOW=EUR(Mode,PRICE_LOW,i,per1,per2)-USD(Mode,PRICE_LOW,i,per1,per2);
CLOSE=EUR(Mode,PRICE_CLOSE,i,per1,per2)-USD(Mode,PRICE_CLOSE,i,per1,per2);
}
if (Symbol()=="EURGBP")
{
OPEN=EUR(Mode,PRICE_OPEN,i,per1,per2)-GBP(Mode,PRICE_OPEN,i,per1,per2);
HIGH=EUR(Mode,PRICE_HIGH,i,per1,per2)-GBP(Mode,PRICE_HIGH,i,per1,per2);
LOW=EUR(Mode,PRICE_LOW,i,per1,per2)-GBP(Mode,PRICE_LOW,i,per1,per2);
CLOSE=EUR(Mode,PRICE_CLOSE,i,per1,per2)-GBP(Mode,PRICE_CLOSE,i,per1,per2);
}
if (Symbol()=="EURCHF")
{
OPEN=EUR(Mode,PRICE_OPEN,i,per1,per2)-CHF(Mode,PRICE_OPEN,i,per1,per2);
HIGH=EUR(Mode,PRICE_HIGH,i,per1,per2)-CHF(Mode,PRICE_HIGH,i,per1,per2);
LOW=EUR(Mode,PRICE_LOW,i,per1,per2)-CHF(Mode,PRICE_LOW,i,per1,per2);
CLOSE=EUR(Mode,PRICE_CLOSE,i,per1,per2)-CHF(Mode,PRICE_CLOSE,i,per1,per2);
}
if (Symbol()=="EURJPY")
{
OPEN=EUR(Mode,PRICE_OPEN,i,per1,per2)-JPY(Mode,PRICE_OPEN,i,per1,per2);
HIGH=EUR(Mode,PRICE_HIGH,i,per1,per2)-JPY(Mode,PRICE_HIGH,i,per1,per2);
LOW=EUR(Mode,PRICE_LOW,i,per1,per2)-JPY(Mode,PRICE_LOW,i,per1,per2);
CLOSE=EUR(Mode,PRICE_CLOSE,i,per1,per2)-JPY(Mode,PRICE_CLOSE,i,per1,per2);
}
if (Symbol()=="GBPUSD")
{
OPEN=GBP(Mode,PRICE_OPEN,i,per1,per2)-USD(Mode,PRICE_OPEN,i,per1,per2);
HIGH=GBP(Mode,PRICE_HIGH,i,per1,per2)-USD(Mode,PRICE_HIGH,i,per1,per2);
LOW=GBP(Mode,PRICE_LOW,i,per1,per2)-USD(Mode,PRICE_LOW,i,per1,per2);
CLOSE=GBP(Mode,PRICE_CLOSE,i,per1,per2)-USD(Mode,PRICE_CLOSE,i,per1,per2);
}
if (Symbol()=="GBPCHF")
{
OPEN=GBP(Mode,PRICE_OPEN,i,per1,per2)-CHF(Mode,PRICE_OPEN,i,per1,per2);
HIGH=GBP(Mode,PRICE_HIGH,i,per1,per2)-CHF(Mode,PRICE_HIGH,i,per1,per2);
LOW=GBP(Mode,PRICE_LOW,i,per1,per2)-CHF(Mode,PRICE_LOW,i,per1,per2);
CLOSE=GBP(Mode,PRICE_CLOSE,i,per1,per2)-CHF(Mode,PRICE_CLOSE,i,per1,per2);
}
if (Symbol()=="GBPJPY")
{
OPEN=GBP(Mode,PRICE_OPEN,i,per1,per2)-JPY(Mode,PRICE_OPEN,i,per1,per2);
HIGH=GBP(Mode,PRICE_HIGH,i,per1,per2)-JPY(Mode,PRICE_HIGH,i,per1,per2);
LOW=GBP(Mode,PRICE_LOW,i,per1,per2)-JPY(Mode,PRICE_LOW,i,per1,per2);
CLOSE=GBP(Mode,PRICE_CLOSE,i,per1,per2)-JPY(Mode,PRICE_CLOSE,i,per1,per2);
}
if (Symbol()=="USDCHF")
{
OPEN=USD(Mode,PRICE_OPEN,i,per1,per2)-CHF(Mode,PRICE_OPEN,i,per1,per2);
HIGH=USD(Mode,PRICE_HIGH,i,per1,per2)-CHF(Mode,PRICE_HIGH,i,per1,per2);
LOW=USD(Mode,PRICE_LOW,i,per1,per2)-CHF(Mode,PRICE_LOW,i,per1,per2);
CLOSE=USD(Mode,PRICE_CLOSE,i,per1,per2)-CHF(Mode,PRICE_CLOSE,i,per1,per2);
}
if (Symbol()=="USDJPY")
{
OPEN=USD(Mode,PRICE_OPEN,i,per1,per2)-JPY(Mode,PRICE_OPEN,i,per1,per2);
HIGH=USD(Mode,PRICE_HIGH,i,per1,per2)-JPY(Mode,PRICE_HIGH,i,per1,per2);
LOW=USD(Mode,PRICE_LOW,i,per1,per2)-JPY(Mode,PRICE_LOW,i,per1,per2);
CLOSE=USD(Mode,PRICE_CLOSE,i,per1,per2)-JPY(Mode,PRICE_CLOSE,i,per1,per2);
}
if (Symbol()=="CHFJPY")
{
OPEN=CHF(Mode,PRICE_OPEN,i,per1,per2)-JPY(Mode,PRICE_OPEN,i,per1,per2);
HIGH=CHF(Mode,PRICE_HIGH,i,per1,per2)-JPY(Mode,PRICE_HIGH,i,per1,per2);
LOW=CHF(Mode,PRICE_LOW,i,per1,per2)-JPY(Mode,PRICE_LOW,i,per1,per2);
CLOSE=CHF(Mode,PRICE_CLOSE,i,per1,per2)-JPY(Mode,PRICE_CLOSE,i,per1,per2);
}
ExtBuffer0[i]=(OPEN+HIGH+LOW+CLOSE)/4;
if (ExtBuffer0[i]>0)
{
ExtBuffer1[i]=ExtBuffer0[i];
ExtBuffer2[i]=0.0;
}
else if (ExtBuffer0[i]==0)
{
ExtBuffer1[i]=0.0;
ExtBuffer2[i]=0.0;
}
else
{
ExtBuffer1[i]=0.0;
ExtBuffer2[i]=ExtBuffer0[i];
}
}
//----
return(0);
}
//+------------------------------------------------------------------+
double USD(int Mode, int Price, int i, int per1, int per2)
{
return(
(iMA("EURUSD",0,per1,0,Mode,Price,i)-
iMA("EURUSD",0,per2,0,Mode,Price,i))*10000
+
(iMA("GBPUSD",0,per1,0,Mode,Price,i)-
iMA("GBPUSD",0,per2,0,Mode,Price,i))*10000
+
(iMA("USDCHF",0,per2,0,Mode,Price,i)-
iMA("USDCHF",0,per1,0,Mode,Price,i))*10000
+
(iMA("USDJPY",0,per2,0,Mode,Price,i)-
iMA("USDJPY",0,per1,0,Mode,Price,i))*100
);
}
//+------------------------------------------------------------------+
//| |
//+------------------------------------------------------------------+
double EUR(int Mode, int Price, int i, int per1, int per2)
{
return(
(iMA("EURUSD",0,per2,0,Mode,Price,i)-
iMA("EURUSD",0,per1,0,Mode,Price,i))*10000
+
(iMA("EURGBP",0,per2,0,Mode,Price,i)-
iMA("EURGBP",0,per1,0,Mode,Price,i))*10000
+
(iMA("EURCHF",0,per2,0,Mode,Price,i)-
iMA("EURCHF",0,per1,0,Mode,Price,i))*10000
+
(iMA("EURJPY",0,per2,0,Mode,Price,i)-
iMA("EURJPY",0,per1,0,Mode,Price,i))*100
);
}
//+------------------------------------------------------------------+
//| |
//+------------------------------------------------------------------+
double GBP(int Mode, int Price, int i, int per1, int per2)
{
return(
(iMA("GBPUSD",0,per2,0,Mode,Price,i)-
iMA("GBPUSD",0,per1,0,Mode,Price,i))*10000
+
(iMA("EURGBP",0,per1,0,Mode,Price,i)-
iMA("EURGBP",0,per2,0,Mode,Price,i))*10000
+
(iMA("GBPCHF",0,per2,0,Mode,Price,i)-
iMA("GBPCHF",0,per1,0,Mode,Price,i))*10000
+
(iMA("GBPJPY",0,per2,0,Mode,Price,i)-
iMA("GBPJPY",0,per1,0,Mode,Price,i))*100
);
}
//+------------------------------------------------------------------+
//| |
//+------------------------------------------------------------------+
double CHF(int Mode, int Price, int i, int per1, int per2)
{
return(
(iMA("USDCHF",0,per1,0,Mode,Price,i)-
iMA("USDCHF",0,per2,0,Mode,Price,i))*10000
+
(iMA("EURCHF",0,per1,0,Mode,Price,i)-
iMA("EURCHF",0,per2,0,Mode,Price,i))*10000
+
(iMA("GBPCHF",0,per1,0,Mode,Price,i)-
iMA("GBPCHF",0,per2,0,Mode,Price,i))*10000
+
(iMA("CHFJPY",0,per2,0,Mode,Price,i)-
iMA("CHFJPY",0,per1,0,Mode,Price,i))*100
);
}
//+------------------------------------------------------------------+
//| |
//+------------------------------------------------------------------+
double JPY(int Mode, int Price, int i, int per1, int per2)
{
return(
(iMA("USDJPY",0,per1,0,Mode,Price,i)-
iMA("USDJPY",0,per2,0,Mode,Price,i))*100
+
(iMA("EURJPY",0,per1,0,Mode,Price,i)-
iMA("EURJPY",0,per2,0,Mode,Price,i))*100
+
(iMA("GBPJPY",0,per1,0,Mode,Price,i)-
iMA("GBPJPY",0,per2,0,Mode,Price,i))*100
+
(iMA("CHFJPY",0,per1,0,Mode,Price,i)-
iMA("CHFJPY",0,per2,0,Mode,Price,i))*100
);
}
//+------------------------------------------------------------------+
Comments