SHI_Channel_v1
Download script
This script functions as a technical analysis tool designed to automatically identify and project trend channels on a price chart. It simplifies the process of finding market structure by using specific geometric logic to determine where price is heading based on historical highs and lows.
Core Logic and Behavior
1. Identifying Market Pivots (Fractals) The script begins by scanning a specific number of past candles (the "lookback" period) to find significant turning points in the market. It specifically looks for "fractals"—points where the price reaches a high or low relative to the bars immediately surrounding it. The amount of data it scans automatically adjusts based on the timeframe you are using (e.g., it uses a different sensitivity for 1-minute charts versus daily charts).
2. Trend Channel Construction Once the script identifies two significant structural points (a high and a low), it calculates the "step" or angle between them. Using these two points as an anchor, it constructs a linear trend channel consisting of three main components:
- The Upper Bound: A boundary line representing the ceiling of the current price movement.
- The Lower Bound: A boundary line representing the floor of the current price movement.
- The Median Line: A dotted middle line that represents the equilibrium point between the upper and lower bounds.
3. Dynamic Projection Instead of just drawing a small line between two past points, the script projects these boundaries forward into the future. It calculates where the channel should end based on a predefined number of bars (the "AllBars" parameter), allowing traders to see the potential trajectory of the price move.
4. Dynamic Price Filtering The script includes logic to ensure the projected lines remain relevant to current market action. It checks the most recent price data against the calculated boundaries. If the price has breached a specific boundary, the script attempts to adjust the starting coordinates of the channel to ensure the visual representation remains accurate to the most recent "breakout" or "rejection" point.
5. Visual Representation The final output is a set of three trend lines drawn directly on your chart:
- Two solid, thick green lines defining the outer boundaries of the channel.
- One thin, dotted green line in the center to help identify the mean price action.
- An indicator arrow that can signal specific price points based on these calculations.
/*-----------------------------+
| |
| Shared by www.Aptrafx.com |
| |
+------------------------------*/
//+------------------------------------------------------------------+
//| SHI_Channel.mq4 |
//| Copyright © 2004, Shurka & Kevin |
//| |
//+------------------------------------------------------------------+
#property copyright "Copyright © 2004, Shurka & Kevin"
#property link ""
#property indicator_chart_window
#property indicator_buffers 1
#property indicator_color1 Red
double ExtMapBuffer1[];
//---- input parameters
extern int AllBars=240;
extern int BarsForFract=0;
int CurrentBar=0;
double Step=0;
int B1=-1,B2=-1;
int UpDown=0;
double P1=0,P2=0,PP=0;
int i=0,AB=300,BFF=0;
int ishift=0;
double iprice=0;
datetime T1,T2;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int init()
{
//---- indicators
SetIndexStyle(0,DRAW_ARROW);
SetIndexArrow(0,164);
SetIndexBuffer(0,ExtMapBuffer1);
SetIndexEmptyValue(0,0.0);
//----
return(0);
}
//+------------------------------------------------------------------+
//| Custor indicator deinitialization function |
//+------------------------------------------------------------------+
int deinit()
{
//----
//----
return(0);
}
void DelObj()
{
ObjectDelete("TL1");
ObjectDelete("TL2");
ObjectDelete("MIDL");
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
int start()
{
int counted_bars=IndicatorCounted();
//----
if ((AllBars==0) || (Bars<AllBars)) AB=Bars; else AB=AllBars; //AB-êîëè÷åñòâî îáñ÷èòûâàåìûõ áàðîâ
if (BarsForFract>0)
BFF=BarsForFract;
else
{
switch (Period())
{
case 1: BFF=12; break;
case 5: BFF=48; break;
case 15: BFF=24; break;
case 30: BFF=24; break;
case 60: BFF=12; break;
case 240: BFF=15; break;
case 1440: BFF=10; break;
case 10080: BFF=6; break;
default: DelObj(); return(-1); break;
}
}
CurrentBar=2; //ñ÷èòàåì ñ òðåòüåãî áàðà, ÷òîáû ôðàêòàë "çàêðåïèëñÿ
B1=-1; B2=-1; UpDown=0;
while(((B1==-1) || (B2==-1)) && (CurrentBar<AB))
{
//UpDown=1 çíà÷èò ïåðâûé ôðàêòàë íàéäåí ñâåðõó, UpDown=-1 çíà÷èò ïåðâûé ôðàêòàë
//íàéäåí ñíèçó, UpDown=0 çíà÷èò ôðàêòàë åù¸ íå íàéäåí.
//Â1 è Â2 - íîìåðà áàðîâ ñ ôðàêòàëàìè, ÷åðåç íèõ ñòðîèì îïîðíóþ ëèíèþ.
//Ð1 è Ð2 - ñîîòâåòñòâåííî öåíû ÷åðåç êîòîðûå áóäåì ëèíèþ ïðîâîäèòü
if((UpDown<1) && (CurrentBar==Lowest(Symbol(),Period(),MODE_LOW,BFF*2+1,CurrentBar-BFF)))
{
if(UpDown==0) { UpDown=-1; B1=CurrentBar; P1=Low[B1]; }
else { B2=CurrentBar; P2=Low[B2];}
}
if((UpDown>-1) && (CurrentBar==Highest(Symbol(),Period(),MODE_HIGH,BFF*2+1,CurrentBar-BFF)))
{
if(UpDown==0) { UpDown=1; B1=CurrentBar; P1=High[B1]; }
else { B2=CurrentBar; P2=High[B2]; }
}
CurrentBar++;
}
if((B1==-1) || (B2==-1)) {DelObj(); return(-1);} // Çíà÷èò íå íàøëè ôðàêòàëîâ ñðåäè 300 áàðîâ 8-)
Step=(P2-P1)/(B2-B1);//Âû÷èñëèëè øàã, åñëè îí ïîëîæèòåëüíûé, òî êàíàë íèñõîäÿùèé
P1=P1-B1*Step; B1=0;//ïåðåñòàâëÿåì öåíó è ïåðâûé áàð ê íóëþ
//À òåïåðü îïîðíóþ òî÷êó ïðîòèâîïîëîæíîé ëèíèè êàíàëà.
ishift=0; iprice=0;
if(UpDown==1)
{
PP=Low[2]-2*Step;
for(i=3;i<=B2;i++)
{
if(Low[i]<PP+Step*i) { PP=Low[i]-i*Step; }
}
if(Low[0]<PP) {ishift=0; iprice=PP;}
if(Low[1]<PP+Step) {ishift=1; iprice=PP+Step;}
if(High[0]>P1) {ishift=0; iprice=P1;}
if(High[1]>P1+Step) {ishift=1; iprice=P1+Step;}
}
else
{
PP=High[2]-2*Step;
for(i=3;i<=B2;i++)
{
if(High[i]>PP+Step*i) { PP=High[i]-i*Step;}
}
if(Low[0]<P1) {ishift=0; iprice=P1;}
if(Low[1]<P1+Step) {ishift=1; iprice=P1+Step;}
if(High[0]>PP) {ishift=0; iprice=PP;}
if(High[1]>PP+Step) {ishift=1; iprice=PP+Step;}
}
//Òåïåðü ïåðåñòàâèì êîíå÷íóþ öåíó è áàð íà ÀÂ, ÷òîáû ëèíèè êàíàëà ðèñîâàëèñü ïîäëèííåå
P2=P1+AB*Step;
T1=Time[B1]; T2=Time[AB];
//Åñëè íå áûëî ïåðåñå÷åíèÿ êàíàëà, òî 0, èíà÷å ñòàâèì ïñèñó.
if(iprice!=0) ExtMapBuffer1[ishift]=iprice;
DelObj();
ObjectCreate("TL1",OBJ_TREND,0,T2,PP+Step*AB,T1,PP);
ObjectSet("TL1",OBJPROP_COLOR,Lime);
ObjectSet("TL1",OBJPROP_WIDTH,2);
ObjectSet("TL1",OBJPROP_STYLE,STYLE_SOLID);
ObjectCreate("TL2",OBJ_TREND,0,T2,P2,T1,P1);
ObjectSet("TL2",OBJPROP_COLOR,Lime);
ObjectSet("TL2",OBJPROP_WIDTH,2);
ObjectSet("TL2",OBJPROP_STYLE,STYLE_SOLID);
ObjectCreate("MIDL",OBJ_TREND,0,T2,(P2+PP+Step*AB)/2,T1,(P1+PP)/2);
ObjectSet("MIDL",OBJPROP_COLOR,Lime);
ObjectSet("MIDL",OBJPROP_WIDTH,1);
ObjectSet("MIDL",OBJPROP_STYLE,STYLE_DOT);
//----
return(0);
}
//+------------------------------------------------------------------+
Comments