Support Resistance_v2
Download scriptThis script is designed to automatically identify and visualize historical Support and Resistance (S/R) levels on your trading chart. It scans through market data to find significant price turning points, effectively "mapping" out the zones where price has historically struggled to move above or below.
Core Functionality
Multi-Timeframe Analysis The logic allows you to view key support and resistance levels from different timeframes (e.g., 5 minutes, 1 hour, daily) regardless of what chart you are currently viewing. This provides a broader perspective on market structure by highlighting "strong" levels that persist across different durations.
Smart Level Identification The tool doesn't just mark every high and low point. It uses a specific logical flow to filter out market "noise":
- Depth & Deviation: It looks back over a set number of bars (Depth) to find the highest highs and lowest lows, ensuring only significant peaks and valleys are considered.
- Proximity Filtering: It ignores minor fluctuations that fall within a very small price range (Deviation), focusing only on distinct movements.
- Trend Filtering: It employs a "backstep" logic to ensure that a new level is actually significant compared to the ones immediately preceding it, preventing the chart from becoming cluttered with redundant lines.
Dynamic Cleanup and Refinement The script performs a secondary "refining" pass on the data it collects:
- Conflict Resolution: If two levels are identified too close to one another, the logic prioritizes the most significant one and removes the weaker duplicate.
- Automatic Housekeeping: When you remove the indicator or switch timeframes, the script is designed to clean up the chart by deleting the lines it previously drew, keeping your workspace organized.
Visual Representation Once the logic identifies a valid Support or Resistance level:
- It draws a Trend Line on the chart.
- The line extends into the future (as a ray) to show you where potential price reactions might occur.
- Each line is automatically labeled with its corresponding timeframe and the exact price level, making it easy to identify at a glance.
- The colors of the lines change dynamically based on the timeframe selected, allowing you to visually distinguish between short-term and long-term structural levels.
//+------------------------------------------------------------------+
//| SUPRESMultiFrame.mq4 |
//| |
//| RD |
//+------------------------------------------------------------------+
#property copyright "RD"
#property link "marynarz15@wp.pl"
#property indicator_chart_window
#define MaxObject 1000
//---- indicator parameters
extern int TimeFrame=5;
extern int BarsMax=144;
extern int ExtDepth=13;
extern int ExtDeviation=1;
extern int ExtBackstep=5;
extern bool DeleteObjectsOnExit=true;
extern color LineColor1=RosyBrown;
extern color LineColor5=Aqua;
extern color LineColor15=DeepPink;
extern color LineColor30=PaleVioletRed;
extern color LineColor60=Red;
extern color LineColor240=DarkOrange;
extern color LineColor1440=DeepSkyBlue;
extern color LineColor10080=Lime;
//-----------------------
double ExtMapBuffer[];
double ExtMapBuffer2[];
int SUPRESCount=0;
int linewidth;
string NamePattern;
color LineColor;
//+------------------------------------------------------------------+
//| Delete objects |
//+------------------------------------------------------------------+
int DeleteSupRes()
{
int ObjectCount=ObjectsTotal();
string names[MaxObject];
for(int i=0; i<ObjectCount;i++)
names[i]=ObjectName(i);
for(i=0; i<ObjectCount;i++)
{
string objname=names[i];
objname=StringSubstr(objname,0,StringLen(NamePattern));
if (objname!=NamePattern || ObjectType(names[i])!=OBJ_TREND)
names[i]="";
}
for(i=0; i<ObjectCount;i++)
{
if (names[i]!="")
{
ObjectDelete(names[i]);}
}
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int init()
{
IndicatorBuffers(2);
SetIndexBuffer(0,ExtMapBuffer);
SetIndexBuffer(1,ExtMapBuffer2);
SetIndexEmptyValue(0,0.0);
ArraySetAsSeries(ExtMapBuffer,true);
ArraySetAsSeries(ExtMapBuffer2,true);
switch(TimeFrame)
{
case 1: linewidth=1; LineColor=LineColor1; break;
case 5: linewidth=1; LineColor=LineColor5; break;
case 15: linewidth=1; LineColor=LineColor15; break;
case 30: linewidth=1; LineColor=LineColor30; break;
case 60: linewidth=1; LineColor=LineColor60; break;
case 240: linewidth=1; LineColor=LineColor240; break;
case 1440: linewidth=1; LineColor=LineColor1440; break;
case 10080: linewidth=1; LineColor=LineColor10080; break;
default: linewidth=1; TimeFrame=Period(); break;
}
NamePattern=DoubleToStr(TimeFrame,0)+" SUPRES ";
if (BarsMax<55) BarsMax=55;
//----
DeleteSupRes();
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator deinitialization function |
//+------------------------------------------------------------------+
int deinit()
{
if (DeleteObjectsOnExit) DeleteSupRes();
return(0);
}
//+------------------------------------------------------------------+
//| |
//+------------------------------------------------------------------+
int start()
{
int shift, back,lasthighpos,lastlowpos;
double val,res;
double curlow,curhigh,lasthigh,lastlow;
string objectname;
//----
if(BarsMax==0) {BarsMax=Bars/2;}// return(0);
for(shift=iBars(NULL,TimeFrame)-ExtDepth; shift>=0; shift--)
{
val=iLow(NULL,TimeFrame,Lowest(NULL,TimeFrame,MODE_LOW,ExtDepth,shift));
if(val==lastlow) val=0.0;
else
{
lastlow=val;
if((iLow(NULL,TimeFrame,shift)-val)>(ExtDeviation*Point)) val=0.0;
else
{
for(back=1; back<=ExtBackstep; back++)
{
res=ExtMapBuffer[shift+back];
if((res!=0)&&(res>val)) ExtMapBuffer[shift+back]=0.0;
}
}
}
ExtMapBuffer[shift]=val;
//--- high
val=iHigh(NULL,TimeFrame,Highest(NULL,TimeFrame,MODE_HIGH,ExtDepth,shift));
if(val==lasthigh) val=0.0;
else
{
lasthigh=val;
if((val-iHigh(NULL,TimeFrame,shift))>(ExtDeviation*Point)) val=0.0;
else
{
for(back=1; back<=ExtBackstep; back++)
{
res=ExtMapBuffer2[shift+back];
if((res!=0)&&(res<val)) ExtMapBuffer2[shift+back]=0.0;
}
}
}
ExtMapBuffer2[shift]=val;
}
// final cutting
lasthigh=-1; lasthighpos=-1;
lastlow=-1; lastlowpos=-1;
//----
for(shift=iBars(NULL,TimeFrame)-ExtDepth; shift>=0; shift--)
{
curlow=ExtMapBuffer[shift];
curhigh=ExtMapBuffer2[shift];
if((curlow==0)&&(curhigh==0)) continue;
//---
if(curhigh!=0)
{
if(lasthigh>0)
{
if(lasthigh<curhigh) ExtMapBuffer2[lasthighpos]=0;
else ExtMapBuffer2[shift]=0;
}
//---
if(lasthigh<curhigh || lasthigh<0)
{
lasthigh=curhigh;
lasthighpos=shift;
}
lastlow=-1;
}
//----
if(curlow!=0)
{
if(lastlow>0)
{
if(lastlow>curlow) ExtMapBuffer[lastlowpos]=0;
else ExtMapBuffer[shift]=0;
}
//---
if((curlow<lastlow)||(lastlow<0))
{
lastlow=curlow;
lastlowpos=shift;
}
lasthigh=-1;
}
}
for(shift=iBars(NULL,TimeFrame)-1; shift>=0; shift--)
{
if(shift>=iBars(NULL,TimeFrame)-ExtDepth) ExtMapBuffer[shift]=0.0;
else
{
res=ExtMapBuffer2[shift];
if(res!=0.0) ExtMapBuffer[shift]=res;
}
}
int count=0;
double TempBufferPrice[MaxObject];
int TempBufferBar[MaxObject];
string ObjectNames[MaxObject];
//----
for(shift=BarsMax; shift>0; shift--)
if (ExtMapBuffer[shift]>0)
{
count++;
TempBufferPrice[count-1]=ExtMapBuffer[shift];
TempBufferBar[count-1]=shift;
}
for(int i=0; i<count; i++)
ObjectNames[i]=TimeFrame+"m S/R("+i+")"/*DoubleToStr(TempBufferPrice[i],Digits)+" "+
TimeToStr(iTime(NULL,TimeFrame,TempBufferBar[i]),TIME_DATE|TIME_MINUTES)*/;
//----
int ObjectForDeleteCount=0;
string ObjectsForDelete[MaxObject];
for(i=0; i<ObjectsTotal(); i++)
{
objectname=ObjectName(i);
if (StringSubstr(objectname,0,StringLen(NamePattern))==NamePattern)
{
ObjectForDeleteCount++;
ObjectsForDelete[ObjectForDeleteCount-1]=objectname;
}
}
for(i=0; i<count-2; i++)
{
objectname=ObjectNames[i];
for(int j=0; j<ObjectForDeleteCount; j++)
if(ObjectsForDelete[j]==objectname)
{
ObjectsForDelete[j]="";
break;
}
}
for(j=0; j<ObjectForDeleteCount; j++)
if (ObjectsForDelete[j]!="")
{
ObjectDelete(ObjectsForDelete[j]);
}
//----
for(i=0; i<count; i++)
{
if (ObjectFind(ObjectNames[i])==-1)
{
ObjectCreate(ObjectNames[i],OBJ_TREND,0,iTime(NULL,TimeFrame,TempBufferBar[i]),TempBufferPrice[i],
iTime(NULL,TimeFrame,TempBufferBar[i])+10080*60,TempBufferPrice[i]);
ObjectSet(ObjectNames[i],OBJPROP_WIDTH,linewidth);
ObjectSet(ObjectNames[i],OBJPROP_COLOR,LineColor);
ObjectSet(ObjectNames[i],OBJPROP_RAY,True);
ObjectSetText(ObjectNames[i],ObjectNames[i]+" "+DoubleToStr(TempBufferPrice[i],Digits),8,"Courier",LightSteelBlue);
}
}
}
//+------------------------------------------------------------------+
Comments