Murrey_Math_MT4_Period_VG_v1

Download script
Author: Vladislav Goshkov (VG).
Murrey_Math_MT4_Period_VG_v1

This tool is a technical analysis indicator designed to identify key price levels by breaking down market movement into a structured "Octave" system. Instead of looking at every minor fluctuation, the logic focuses on identifying the primary range of price action and dividing it into eight distinct zones. These zones help traders distinguish between major support/resistance areas and temporary price stalls.

How the Logic Works

1. Range Identification The script first analyzes a specific period of historical data to find the highest and lowest prices reached. It then calculates the "fractal" of the market—essentially determining the magnitude of the current trading range. By comparing the current price action to these historical boundaries, it establishes the "floor" and the "ceiling" for the current market cycle.

2. The Octave Division Once the total range is established, the logic mathematically divides that space into 8 equal parts (an "Octave"). This creates a grid of levels that act as benchmarks for price movement. Each level has a specific significance:

  • The Center Point (4/8): This is considered the most vital pivot point. It represents the primary balance of the market. If the price is above this line, it serves as strong support; if below, it acts as significant resistance.
  • Extreme Zones (0/8 and 8/8): These represent the "Ultimate" boundaries. They indicate that the market is extremely overbought or oversold, suggesting that prices have pushed very far from the average and may be reaching a limit.
  • Trading Range Boundaries (3/8 and 5/8): These lines define the "Premium" and "Discount" zones. The logic suggests that if price spends significant time near these levels, it indicates a high-probability area for potential trend shifts or sustained consolidation.
  • Pivot and Stall Points (1/8, 2/8, 6/8, 7/8): These are transitional levels. They identify areas where the price might "stall" or briefly reverse before continuing its main direction.

3. Dynamic Adjustment The script doesn't just draw static lines; it continuously recalculates these levels as new price data enters the chart. By evaluating the relationship between the current highs and lows against the mathematical subdivisions, the indicator automatically repositions the levels to stay relevant to the most recent market volatility.

Summary for the User

Think of this tool as a map that draws the "geography" of the current market. It tells you where the ground is firm (Support), where the ceiling is low (Resistance), and which areas are considered "fair value." By observing where the price sits relative to these 8 levels, you can better identify whether the market is overstretched or if it is finding a stable home in a specific trading range.

12 Views
0 Downloads
0 Favorites
Murrey_Math_MT4_Period_VG_v1 
/*-----------------------------+
|			       |
| Shared by www.Aptrafx.com    |
|			       |
+------------------------------*/

//+------------------------------------------------------------------+
//|                                            Murrey_Math_MT_VG.mq4 |
//|                       Copyright © 2004, Vladislav Goshkov (VG).  |
//|                                           4vg@mail.ru            |
//+------------------------------------------------------------------+
#property copyright "Vladislav Goshkov (VG)."
#property link      "4vg@mail.ru"

#property indicator_chart_window

// ============================================================================================
// * Ëèíèè 8/8 è 0/8 (Îêîí÷àòåëüíîå ñîïðîòèâëåíèå).
// * Ýòè ëèíèè ñàìûå ñèëüíûå è îêàçûâàþò ñèëüíåéøèå ñîïðîòèâëåíèÿ è ïîääåðæêó.
// ============================================================================================
//* Ëèíèÿ 7/8  (Ñëàáàÿ, ìåñòî äëÿ îñòàíîâêè è ðàçâîðîòà). Weak, Stall and Reverse
//* Ýòà ëèíèÿ ñëàáà. Åñëè öåíà çàøëà ñëèøêîì äàëåêî è ñëèøêîì áûñòðî è åñëè îíà îñòàíîâèëàñü îêîëî ýòîé ëèíèè, 
//* çíà÷èò îíà ðàçâåðíåòñÿ áûñòðî âíèç. Åñëè öåíà íå îñòàíîâèëàñü îêîëî ýòîé ëèíèè, îíà ïðîäîëæèò äâèæåíèå ââåðõ ê 8/8.
// ============================================================================================
//* Ëèíèÿ 1/8  (Ñëàáàÿ, ìåñòî äëÿ îñòàíîâêè è ðàçâîðîòà). Weak, Stall and Reverse
//* Ýòà ëèíèÿ ñëàáà. Åñëè öåíà çàøëà ñëèøêîì äàëåêî è ñëèøêîì áûñòðî è åñëè îíà îñòàíîâèëàñü îêîëî ýòîé ëèíèè, 
//* çíà÷èò îíà ðàçâåðíåòñÿ áûñòðî ââåðõ. Åñëè öåíà íå îñòàíîâèëàñü îêîëî ýòîé ëèíèè, îíà ïðîäîëæèò äâèæåíèå âíèç ê 0/8.
// ============================================================================================
//* Ëèíèè 6/8 è 2/8 (Âðàùåíèå, ðàçâîðîò). Pivot, Reverse
//* Ýòè äâå ëèíèè óñòóïàþò â ñâîåé ñèëå òîëüêî 4/8 â ñâîåé ñïîñîáíîñòè ïîëíîñòüþ ðàçâåðíóòü öåíîâîå äâèæåíèå.
// ============================================================================================
//* Ëèíèÿ 5/8 (Âåðõ òîðãîâîãî äèàïàçîíà). Top of Trading Range
//* Öåíû âñåõ ðûíêîâ òðàòÿò 40% âðåìåíè, íà äâèæåíèå ìåæäó 5/8 è 3/8 ëèíèÿìè. 
//* Åñëè öåíà äâèãàåòñÿ îêîëî ëèíèè 5/8 è îñòàåòñÿ îêîëî íåå â òå÷åíèè 10-12 äíåé, ðûíîê ñêàçàë ÷òî ñëåäóåò 
//* ïðîäàâàòü â ýòîé «ïðåìèàëüíîé çîíå», ÷òî è äåëàþò íåêîòîðûå ëþäè, íî åñëè öåíà ñîõðàíÿåò òåíäåíöèþ îñòàâàòüñÿ 
//* âûøå 5/8, òî îíà è îñòàíåòñÿ âûøå íåå. Åñëè, îäíàêî, öåíà ïàäàåò íèæå 5/8, òî îíà ñêîðåå âñåãî ïðîäîëæèò 
//* ïàäàòü äàëåå äî ñëåäóþùåãî óðîâíÿ ñîïðîòèâëåíèÿ.
// ============================================================================================
//* Ëèíèÿ 3/8 (Äíî òîðãîâîãî äèàïàçîíà). Bottom of Trading Range
//* Åñëè öåíû íèæå ýòîé ëèíè è äâèãàþòñÿ ââåðõ, òî öåíå áóäåò ñëîæíî ïðîáèòü ýòîò óðîâåíü. 
//* Åñëè ïðîáèâàþò ââåðõ ýòó ëèíèþ è îñòàþòñÿ âûøå íåå â òå÷åíèè 10-12 äíåé, çíà÷èò öåíû îñòàíóòñÿ âûøå ýòîé ëèíèè 
//* è ïîòðàòÿò 40% âðåìåíè äâèãàÿñü ìåæäó ýòîé ëèíèåé è 5/8 ëèíèåé.
// ============================================================================================
//* Ëèíèÿ 4/8 (Ãëàâíàÿ ëèíèÿ ñîïðîòèâëåíèÿ/ïîääåðæêè). Major Support/Resistance
//* Ýòà ëèíèÿ îáåñïå÷èâàåò íàèáîëüøåå ñîïðîòèâëåíèå/ïîääåðæêó. Ýòîò óðîâåíü ÿâëÿåòñÿ ëó÷øèì äëÿ íîâîé ïîêóïêè èëè ïðîäàæè. 
//* Åñëè öåíà íàõîäèòñÿ âûøå 4/8, òî ýòî ñèëüíûé óðîâåíü ïîääåðæêè. Åñëè öåíà íàõîäèòñÿ íèæå 4/8, òî ýòî ïðåêðàñíûé óðîâåíü 
//* ñîïðîòèâëåíèÿ.
// ============================================================================================
extern int P = 64;
extern int MMPeriod = 1440;
extern int StepBack = 0;

extern color  mml_clr_m_2_8 = White;       // [-2]/8
extern color  mml_clr_m_1_8 = White;       // [-1]/8
extern color  mml_clr_0_8   = Aqua;        //  [0]/8
extern color  mml_clr_1_8   = Yellow;      //  [1]/8
extern color  mml_clr_2_8   = Red;         //  [2]/8
extern color  mml_clr_3_8   = Green;       //  [3]/8
extern color  mml_clr_4_8   = Blue;        //  [4]/8
extern color  mml_clr_5_8   = Green;       //  [5]/8
extern color  mml_clr_6_8   = Red;         //  [6]/8
extern color  mml_clr_7_8   = Yellow;      //  [7]/8
extern color  mml_clr_8_8   = Aqua;        //  [8]/8
extern color  mml_clr_p_1_8 = White;       // [+1]/8
extern color  mml_clr_p_2_8 = White;       // [+2]/8

extern int    mml_wdth_m_2_8 = 2;        // [-2]/8
extern int    mml_wdth_m_1_8 = 1;       // [-1]/8
extern int    mml_wdth_0_8   = 1;        //  [0]/8
extern int    mml_wdth_1_8   = 1;      //  [1]/8
extern int    mml_wdth_2_8   = 1;         //  [2]/8
extern int    mml_wdth_3_8   = 1;       //  [3]/8
extern int    mml_wdth_4_8   = 1;        //  [4]/8
extern int    mml_wdth_5_8   = 1;       //  [5]/8
extern int    mml_wdth_6_8   = 1;         //  [6]/8
extern int    mml_wdth_7_8   = 1;      //  [7]/8
extern int    mml_wdth_8_8   = 1;        //  [8]/8
extern int    mml_wdth_p_1_8 = 1;       // [+1]/8
extern int    mml_wdth_p_2_8 = 2;       // [+2]/8

extern color  MarkColor   = Blue;
extern int    MarkNumber  = 217;


double  dmml = 0,
        dvtl = 0,
        sum  = 0,
        v1 = 0,
        v2 = 0,
        mn = 0,
        mx = 0,
        x1 = 0,
        x2 = 0,
        x3 = 0,
        x4 = 0,
        x5 = 0,
        x6 = 0,
        y1 = 0,
        y2 = 0,
        y3 = 0,
        y4 = 0,
        y5 = 0,
        y6 = 0,
        octave = 0,
        fractal = 0,
        range   = 0,
        finalH  = 0,
        finalL  = 0,
        mml[13];

string  ln_txt[13],        
        buff_str = "";
        
int     
        bn_v1   = 0,
        bn_v2   = 0,
        OctLinesCnt = 13,
        mml_thk = 8,
        mml_clr[13],
        mml_wdth[13],
        mml_shft = 35,
        nTime = 0,
        CurPeriod = 0,
        nDigits = 0,
        i = 0;
int NewPeriod=0;
//+------------------------------------------------------------------+
//| Custom indicator initialization function                         |
//+------------------------------------------------------------------+
int init() {
//---- indicators
   if(MMPeriod>0)
      NewPeriod   = P*MathCeil(MMPeriod/Period());
   else NewPeriod = P;
   
   ln_txt[0]  = "[-2/8]P";// "extremely overshoot [-2/8]";// [-2/8]
   ln_txt[1]  = "[-1/8]P";// "overshoot [-1/8]";// [-1/8]
   ln_txt[2]  = "[0/8]P";// "Ultimate Support - extremely oversold [0/8]";// [0/8]
   ln_txt[3]  = "[1/8]P";// "Weak, Stall and Reverse - [1/8]";// [1/8]
   ln_txt[4]  = "[2/8]P";// "Pivot, Reverse - major [2/8]";// [2/8]
   ln_txt[5]  = "[3/8]P";// "Bottom of Trading Range - [3/8], if 10-12 bars then 40% Time. BUY Premium Zone";//[3/8]
   ln_txt[6]  = "[4/8]P";// "Major Support/Resistance Pivotal Point [4/8]- Best New BUY or SELL level";// [4/8]
   ln_txt[7]  = "[5/8]P";// "Top of Trading Range - [5/8], if 10-12 bars then 40% Time. SELL Premium Zone";//[5/8]
   ln_txt[8]  = "[6/8]P";// "Pivot, Reverse - major [6/8]";// [6/8]
   ln_txt[9]  = "[7/8]P";// "Weak, Stall and Reverse - [7/8]";// [7/8]
   ln_txt[10] = "[8/8]P";// "Ultimate Resistance - extremely overbought [8/8]";// [8/8]
   ln_txt[11] = "[+1/8]P";// "overshoot [+1/8]";// [+1/8]
   ln_txt[12] = "[+2/8]P";// "extremely overshoot [+2/8]";// [+2/8]

   //mml_shft = 3;
   mml_thk  = 3;

   // Íà÷àëüíàÿ óñòàíîâêà öâåòîâ óðîâíåé îêòàâ è òîëùèíû ëèíèé
   mml_clr[0]  = mml_clr_m_2_8;   mml_wdth[0] = mml_wdth_m_2_8; // [-2]/8
   mml_clr[1]  = mml_clr_m_1_8;   mml_wdth[1] = mml_wdth_m_1_8; // [-1]/8
   mml_clr[2]  = mml_clr_0_8;     mml_wdth[2] = mml_wdth_0_8;   //  [0]/8
   mml_clr[3]  = mml_clr_1_8;     mml_wdth[3] = mml_wdth_1_8;   //  [1]/8
   mml_clr[4]  = mml_clr_2_8;     mml_wdth[4] = mml_wdth_2_8;   //  [2]/8
   mml_clr[5]  = mml_clr_3_8;     mml_wdth[5] = mml_wdth_3_8;   //  [3]/8
   mml_clr[6]  = mml_clr_4_8;     mml_wdth[6] = mml_wdth_4_8;   //  [4]/8
   mml_clr[7]  = mml_clr_5_8;     mml_wdth[7] = mml_wdth_5_8;   //  [5]/8
   mml_clr[8]  = mml_clr_6_8;     mml_wdth[8] = mml_wdth_6_8;   //  [6]/8
   mml_clr[9]  = mml_clr_7_8;     mml_wdth[9] = mml_wdth_7_8;   //  [7]/8
   mml_clr[10] = mml_clr_8_8;     mml_wdth[10]= mml_wdth_8_8;   //  [8]/8
   mml_clr[11] = mml_clr_p_1_8;   mml_wdth[11]= mml_wdth_p_1_8; // [+1]/8
   mml_clr[12] = mml_clr_p_2_8;   mml_wdth[12]= mml_wdth_p_2_8; // [+2]/8
   
   
//----
   return(0);
  }

//+------------------------------------------------------------------+
//| Custor indicator deinitialization function                       |
//+------------------------------------------------------------------+
int deinit() {
//---- TODO: add your code here
Comment(" ");   
for(i=0;i<OctLinesCnt;i++) {
    buff_str = "mml"+i;
    ObjectDelete(buff_str);
    buff_str = "mml_txt"+i;
    ObjectDelete(buff_str);
    }
//----
   return(0);
  }
//+------------------------------------------------------------------+
//| Custom indicator iteration function                              |
//+------------------------------------------------------------------+
int start() {

//---- TODO: add your code here

if( (nTime != Time[0]) || (CurPeriod != Period()) ) {
   
  //price
   bn_v1 = Lowest(NULL,0,MODE_LOW,NewPeriod+StepBack,StepBack);
   bn_v2 = Highest(NULL,0,MODE_HIGH,NewPeriod+StepBack,StepBack);

   v1 = Low[bn_v1];
   v2 = High[bn_v2];

//determine fractal.....
   if( v2<=250000 && v2>25000 )
   fractal=100000;
   else
     if( v2<=25000 && v2>2500 )
     fractal=10000;
     else
       if( v2<=2500 && v2>250 )
       fractal=1000;
       else
         if( v2<=250 && v2>25 )
         fractal=100;
         else
           if( v2<=25 && v2>12.5 )
           fractal=12.5;
           else
             if( v2<=12.5 && v2>6.25)
             fractal=12.5;
             else
               if( v2<=6.25 && v2>3.125 )
               fractal=6.25;
               else
                 if( v2<=3.125 && v2>1.5625 )
                 fractal=3.125;
                 else
                   if( v2<=1.5625 && v2>0.390625 )
                   fractal=1.5625;
                   else
                     if( v2<=0.390625 && v2>0)
                     fractal=0.1953125;
      
   range=(v2-v1);
   sum=MathFloor(MathLog(fractal/range)/MathLog(2));
   octave=fractal*(MathPow(0.5,sum));
   mn=MathFloor(v1/octave)*octave;
   if( (mn+octave)>v2 )
   mx=mn+octave; 
   else
     mx=mn+(2*octave);


// calculating xx
//x2
    if( (v1>=(3*(mx-mn)/16+mn)) && (v2<=(9*(mx-mn)/16+mn)) )
    x2=mn+(mx-mn)/2; 
    else x2=0;
//x1
    if( (v1>=(mn-(mx-mn)/8))&& (v2<=(5*(mx-mn)/8+mn)) && (x2==0) )
    x1=mn+(mx-mn)/2; 
    else x1=0;

//x4
    if( (v1>=(mn+7*(mx-mn)/16))&& (v2<=(13*(mx-mn)/16+mn)) )
    x4=mn+3*(mx-mn)/4; 
    else x4=0;

//x5
    if( (v1>=(mn+3*(mx-mn)/8))&& (v2<=(9*(mx-mn)/8+mn))&& (x4==0) )
    x5=mx; 
    else  x5=0;

//x3
    if( (v1>=(mn+(mx-mn)/8))&& (v2<=(7*(mx-mn)/8+mn))&& (x1==0) && (x2==0) && (x4==0) && (x5==0) )
    x3=mn+3*(mx-mn)/4; 
    else x3=0;

//x6
    if( (x1+x2+x3+x4+x5) ==0 )
    x6=mx; 
    else x6=0;

     finalH = x1+x2+x3+x4+x5+x6;
// calculating yy
//y1
    if( x1>0 )
    y1=mn; 
    else y1=0;

//y2
    if( x2>0 )
    y2=mn+(mx-mn)/4; 
    else y2=0;

//y3
    if( x3>0 )
    y3=mn+(mx-mn)/4; 
    else y3=0;

//y4
    if( x4>0 )
    y4=mn+(mx-mn)/2; 
    else y4=0;

//y5
    if( x5>0 )
    y5=mn+(mx-mn)/2; 
    else y5=0;

//y6
    if( (finalH>0) && ((y1+y2+y3+y4+y5)==0) )
    y6=mn; 
    else y6=0;

    finalL = y1+y2+y3+y4+y5+y6;

    for( i=0; i<OctLinesCnt; i++) {
         mml[i] = 0;
         }
         
   dmml = (finalH-finalL)/8;

   mml[0] =(finalL-dmml*2); //-2/8
   for( i=1; i<OctLinesCnt; i++) {
        mml[i] = mml[i-1] + dmml;
        }
   for( i=0; i<OctLinesCnt; i++ ){
        buff_str = "mml"+i;
        if(ObjectFind(buff_str) == -1) {
           ObjectCreate(buff_str, OBJ_HLINE, 0, Time[0], mml[i]);
           ObjectSet(buff_str, OBJPROP_STYLE, STYLE_SOLID);
           ObjectSet(buff_str, OBJPROP_COLOR, mml_clr[i]);
           ObjectSet(buff_str, OBJPROP_WIDTH, mml_wdth[i]);
           ObjectMove(buff_str, 0, Time[0],  mml[i]);
           }
        else {
           ObjectMove(buff_str, 0, Time[0],  mml[i]);
           }
             
        buff_str = "mml_txt"+i;
        if(ObjectFind(buff_str) == -1) {
           ObjectCreate(buff_str, OBJ_TEXT, 0, Time[mml_shft], mml_shft);
           ObjectSetText(buff_str, ln_txt[i], 8, "Arial", mml_clr[i]);
           ObjectMove(buff_str, 0, Time[mml_shft],  mml[i]);
           }
        else {
           ObjectMove(buff_str, 0, Time[mml_shft],  mml[i]);
           }
        } // for( i=1; i<=OctLinesCnt; i++ ){

   nTime    = Time[0];
   CurPeriod= Period();
   
   string buff_str = "LR_LatestCulcBar";
   if(ObjectFind(buff_str) == -1) {
      ObjectCreate(buff_str, OBJ_ARROW,0, Time[StepBack], Low[StepBack]-2*Point );
      ObjectSet(buff_str, OBJPROP_ARROWCODE, MarkNumber);
      ObjectSet(buff_str, OBJPROP_COLOR, MarkColor);
      }
   else {
      ObjectMove(buff_str, 0, Time[StepBack], Low[StepBack]-2*Point );
      }

   }
 
//---- End Of Program
  return(0);
  }
//+------------------------------------------------------------------+

Similar scripts

Pivot Lines_RDs

This indicator projects dynamic support and resistance levels by calculating standard pivot points, Camarilla breakout values, and granular midpoint zones based on previous daily price action.

RD-Pivot Lines_J

This indicator projects automated support and resistance levels by synthesizing daily price action with standard pivots, Camarilla breakdown points, and intermediate midpoint calculations.

Murrey_Math_Line_X

This indicator identifies multi-layered support and resistance zones by calculating fractal octaves to map high-probability reversal points and premium trading boundaries.

MMLevls_VG

This indicator identifies dynamic support and resistance zones by applying a fractal-based logarithmic scale to historical price ranges, dividing the market into eight distinct volatility octaves.

TrendEMA_V_1

This indicator dynamically identifies market direction by evaluating the sequential stacking order of three distinct Exponential Moving Averages and displays real-time numerical values on the chart.

Murrey_Math_Line_X_v1

JJN-Bee

This indicator identifies trend reversals by detecting price action pierces through the previous candle's open level, projecting dynamic entry, take-profit, and stop-loss zones based on Average True Range volatility.

K-Barishpoltz Channel Fractals

This indicator automatically identifies price structural extremes to construct dynamic linear channels that define market boundaries and potential correction zones.

JuiceLevelsAlert_v1

This indicator quantifies momentum by calculating the variance between the Exponential Moving Average standard deviation and a fixed price offset to identify overextended volatility peaks.

Cronex T DeMarker GFC

This indicator utilizes a multi-period DeMarker calculation smoothed through a Fibonacci-weighted moving average to identify momentum crossovers and price-action divergences.

rvmGann_sv8_n_v1

This indicator identifies structural price pivot points by tracking sequential extreme breakouts and local high/low volatility thresholds.

Comments